Mountain biking is an adrenaline-fueled and thrilling outdoor activity that is enjoyed by many enthusiasts around the world. A crucial aspect of owning a mountain bike is maintenance and repairs. Knowing how to take apart your bike’s parts can save you a lot of money and time in the long run.
One important task every mountain biker should master is removing the rear wheel. As simple as it may seem, it can be a challenging process for beginners or those without the right tools. In this article, we will guide you through the steps required to remove the rear wheel of your mountain bike with ease.
Tools Required for Removing Rear Wheel on a Mountain Bike
Before we dive into the process of removing the rear wheel on a mountain bike, let’s take a brief look at the tools you’ll need for the job. Firstly, you’ll need a wrench that’s appropriately sized for the nuts or bolts that hold the wheel in place. The wrench could be an adjustable or fixed wrench, depending on the type of bike you have. A set of Allen wrenches might also come in handy if your rear wheel has bolts that require hex heads.
You’ll also need a chain whip and a cassette lockring tool if you’re removing the rear wheel to replace the cassette or perform any maintenance work on it. The chain whip helps you hold the cassette in place while you use the lockring tool to loosen the lockring. Other essential tools include a workstand or bike repair stand and rubber gloves to protect your hands from grease and dirt. With these tools at hand, let’s now move on to the next subheading for the step-by-step guide on removing the rear wheel of your mountain bike.
Read Also: Can I Change the Tires on My Mountain Bike? A Guide to Upgrading Your Ride
Steps to Loosen the Nuts or Quick Release Levers
Before you can remove the rear wheel of your mountain bike, you need to loosen the nuts or quick-release levers that are holding it in place. The process of loosening these will differ depending on whether your bike has nuts or quick-release levers.
If your bike has nuts, you will need two wrenches – one to hold the opposite side of the axle in place while you loosen the nut on the other side. Once you have both wrenches in place, turn the wrench on the non-drive side counter-clockwise to loosen the nut. Keep holding the axle in place with the other wrench until the nut is completely loose. If your bike has quick-release levers, simply flip the lever up or release the cam, which will loosen the tension and allow you to remove the wheel. Make sure you keep track of any washers or spacers that come off with the wheel so that you can put them back in the correct place later.
Detaching the Chain from the Rear Derailleur
To remove the rear wheel of a mountain bike, it is essential to take the chain off from the rear derailleur. Before proceeding with this step, shift your bike to the smallest chainring at the front and the smallest gear at the back. This will make detaching the chain easier.
Firstly, locate the connecting link between the rear derailleur and the chain. This connecting link comes in different styles depending on your bike, for example, Shimano or Sram. Once you have located it, use a pair of pliers to open the connecting link. Pulling the link outward with the pliers will separate the chain into two pieces. Make sure you keep the chain safely aside to avoid it from getting tangled up with other components of the bike. With the chain disconnected, you can now proceed to remove the rear wheel.
You may also like: Best Mountain Bike Jackets: Top-Rated Gear for Your Next Ride
Removing the Wheel from the Frame: Tips and Tricks
Removing the rear wheel from a mountain bike may seem daunting, but with the right tips and tricks, it can be a breeze. First, it’s crucial to ensure that the bike is secured properly. This means placing it in a bike stand or turning it upside down and resting the saddle and handlebars on soft surfaces. Once the bike is securely placed, shift the chain to the smallest cog and loosen the quick-release skewer. The skewer can be loosened by lifting the lever and twisting the nut counterclockwise.
Next, remove the wheel by pulling it out of the dropouts. To do this, gently wiggle the wheel while pulling it away from the frame. It’s essential to be careful while removing the wheel to avoid damaging the derailleur or the spokes. Having someone hold the wheel steady while removing it can also help, especially when dealing with a heavy or bulky wheel. With these tips and tricks, removing the rear wheel of a mountain bike can be done efficiently in no time.
Inspecting the Rear Wheel and Hub for Maintenance
After successfully removing the rear wheel from your mountain bike, it is important to examine it for any potential maintenance issues. First, inspect the hub to check for any loose or damaged parts. Make sure the hub cones are properly tightened and that the axle is straight. If you notice any worn or broken parts, such as the bearings, it may be necessary to replace them before reassembling the wheel.
Next, inspect the rim for any dents or cracks. This is particularly important for mountain bikes as they are exposed to rugged terrain which can take a toll on the wheels. If you find any defects, it is best to have the wheel checked by a professional or replace it to prevent any further damage. Taking a few minutes to inspect your rear wheel can help prevent future issues and prolong the life of your bike.
Attaching the Rear Wheel Back on the Mountain Bike
After successfully removing the rear wheel, the next logical step is to attach it back on the mountain bike. Ensure that the wheel is clean before attaching it back to the frame. Begin by lining up the wheel with the dropouts on the frame and slide it carefully into place. Ensure that both the derailleur and the chain run smoothly over the cassette. If the chain does not shift smoothly, it’s essential to adjust the derailleur, and if you’re not sure how to do it, consult a professional or seek advice from your local bike store.
Once the wheel is in place, tighten the quick-release skewer until it feels tight enough, but not too tight. Close the lever to lock it. Finally, lift the rear tire off the ground and spin the wheel to ensure that it runs smoothly. If it wobbles, loosen and re-tighten the skewer until the wheel spins straight and true. Double-check all the bolts, give the bike a few test spins and enjoy your ride.
Related Post: Which Mountain Bike is the Best Fit for You: A Comprehensive Guide to Choosing the Right Bike for Your Riding Style
Common Mistakes to Avoid When Removing Your Rear Wheel
Removing the rear wheel of a mountain bike may seem like a simple task, but it can be tricky. There are several common mistakes that novice and experienced bikers alike can make when attempting to remove the rear wheel. These mistakes can cause damage to the bike or even result in injury to the rider.
The most common mistake is failing to shift the chain to the smallest cog or taking the wheel out of the dropouts without loosening the quick-release skewer. Other mistakes include forgetting to loosen the brake caliper, not aligning the wheel straight and placing the chain on the smallest cog after inserting the rear wheel. By being aware of these mistakes, you can avoid them and safely remove the rear wheel of your mountain bike.
Final Verdict
Removing the rear wheel of a mountain bike requires some effort, but it is essential for bike maintenance and repair. If you follow the steps carefully, you can dismount the wheel quickly and without any damage to your bike. Remember to keep your tools ready and take safety precautions before you start.
Once you have removed the wheel, it is also crucial to inspect and clean it thoroughly, check the tire pressure, and make any necessary adjustments before reattaching it. By doing so, you can ensure the smooth functioning of your bike and enjoy a great ride on your favorite trails. So, go ahead and try it out! With a bit of practice, you’ll be able to remove and reinstall the rear wheel of your mountain bike like a pro.