Mountain biking is a fun and adventurous sport, but it’s also one that requires proper maintenance and care. One of the most important components of your mountain bike is the chain, which is responsible for transferring power from the pedals to the back wheel. However, a worn-out or improperly-fitted chain can significantly affect your bike’s performance and cause unwanted accidents.
In this article, we’ll provide a step-by-step guide on how to properly put on a mountain bike chain. Whether you’re a beginner or a seasoned rider, this guide will help you maintain your bike’s chain and ensure a smooth and safe riding experience. So, let’s get started!
Gather the Necessary Tools and Materials
Before you can start putting on a mountain bike chain, you need to make sure you have all the necessary tools and materials. The first thing you need is a new chain that matches the size of your current one. This will ensure proper compatibility and fit for your bike. You should also have a chain tool, which is used to break the old chain and size the new one to the appropriate length. Additionally, you’ll need a pair of pliers, a small screwdriver, and some grease to lubricate the chain.
Make sure you have a clean and well-lit workspace, as you’ll be handling small and intricate parts. It’s also recommended to wear gloves to protect your hands from dirt and grease. Once you have everything gathered, take some time to familiarize yourself with the chain tool and the process of sizing the new chain. Having a good understanding of the tools and materials you’re working with will make the process much smoother and easier.
Read Also: Is Elm Creek Mountain Bike Trail Open? Your Guide to Hitting the Trails
Remove the Old Chain from Your Bike
Before you can put on a new chain, it’s essential to get rid of the old one. This will ensure that you have a clean and smooth surface to work with, and it’s essential for the longevity of your new chain. Firstly, shift your bike into the biggest chainring and gear at the back. This action will take any tension out of your chain, making it easier to remove.
Next, use a chain tool to break the old chain away from the bike. You need to place the chain in the tool’s cradle between the chain’s pins and the tool’s pushblock. Tighten the tool’s handle to push the pin out of the plate, releasing the chain. Once you’ve done that, you can then use pliers to pull the old chain free from the derailleur and off the bike. Remember to dispose of the old chain safely, and don’t pull it apart; this could result in injuries.
Measure and Cut the New Chain to Proper Length
Before you start installing a new chain on your mountain bike, you need to make sure that the chain is the right length for your specific bike. You don’t want a chain that is too long or too short as it can cause damage to other parts of the bike or even cause accidents. The length of the chain you need depends on the number of gear cogs on the rear cassette and the number of chainrings you have on the front chainset.
To measure the length of the new chain, you will need a chain tool. Place the chain next to the old chain and line up the links. Count the number of links on the old chain and subtract two to three links to make sure the new chain is slightly shorter for better performance. Use the chain tool to remove the excess links from the new chain, making sure that you don’t remove too many links. Once it is the right length, you can move on to the next step in putting on the chain.
You may also like: How to Easily Change a Tubeless Mountain Bike Tire in 5 Simple Steps!
Install the New Chain on Your Bike
Installing a new chain on your mountain bike can seem like a daunting task, but with the proper tools and knowledge, it can be done easily. First, make sure your chain is the correct length. If necessary, use a chain breaker tool to remove excess links.
Next, thread the new chain through the rear derailleur, making sure to follow the correct path as shown in your bike’s manual. Thread the chain around the front chainring and pull it snug, making sure to engage it with the teeth. Finally, connect the two ends of the chain using a quick-link or chain tool, and check the tension. A properly installed chain will have a small amount of slack and should move smoothly through the gears. Don’t forget to lubricate your new chain before riding to ensure a long life and smooth shifting.
Adjust Chain Tension and Alignment
After installing the chain on your mountain bike, adjusting the tension and ensuring proper alignment are crucial steps. The chain tension can have a significant impact on the bike’s performance, and improper alignment can cause unnecessary wear and tear on both the chain and the bike’s other components.
Start by adjusting the tension of the chain. Ideally, there should be around half an inch of vertical movement available in the chain when it’s pulled away from the bottom of the chainring. If it’s too loose or too tight, you’ll need to make adjustments accordingly using the chain tensioner. Additionally, make sure that the chain is running smoothly and quietly through the derailleur system. Once the tension is set, check the alignment of the chain with the chainring, i.e., the sprockets on the front of the bike. If the chain is not aligned correctly, you may need to adjust the derailleur’s limits to ensure that it stays on track. Proper chain tension and alignment will improve shifting performance and overall ride quality.
Lubricate the Chain and Check for Proper Function
Lubricating the chain is an essential step in properly putting on a mountain bike chain. It ensures smooth operation and prolongs the life of the chain. Before applying the lubricant, wipe the chain clean of any dirt or debris that may have accumulated during installation. Then, apply the lube evenly along the length of the chain. Allow the chain to sit for a few minutes for the lubricant to penetrate the links before wiping off any excess.
Once lubricated, it is crucial to check for proper function. Shift through your gears to make sure everything is running smoothly. If you notice any skipping or slipping, check the tension of your chain. A properly tensioned chain will prevent those issues and improve overall performance. Proper maintenance of your chain will increase your bike’s lifespan and make every ride smoother and safer.
Related Post: How to Safely Take a Mountain Bike Chain Off: A Step-by-Step Guide
Tips and Tricks for Maintaining Your Mountain Bike Chain
After going through the process of installing a mountain bike chain, you definitely want to ensure that it lasts as long as possible. Proper maintenance is key to the longevity and efficiency of your chain. First, lubrication is very important. Use a good quality lubricant to keep your chain clean and lubricated. A well-lubricated chain helps your bike run smoothly and efficiently, and also reduces the wear and tear on the chain.
You should also make sure to keep your chain clean. Dirt and grime can accumulate on your chain and cause it to wear out quickly. Using a degreaser to clean your chain periodically is a great way to keep it clean. Additionally, it is important to check your chain regularly for wear and tear. Make sure to replace your chain as soon as it starts to show signs of wear to prevent further damage to your bike. By implementing these tips and tricks, you can help ensure your mountain bike chain lasts as long as possible and keeps your bike running smoothly.
The Conclusion
In order to keep your mountain bike chain in the best possible condition, it is important to take proper care when installing it. By following these simple steps, you can confidently put on a new chain and ensure a smoother ride on the trails.
Remember to always clean your chain before installing a new one, and to measure the length of your old chain to ensure proper sizing. Take care to thread the chain through the derailleur and cassette accurately, and use a chain tool to connect the ends together. By keeping these tips in mind, you can easily put on a mountain bike chain and enjoy a safe and enjoyable ride.