Installing a rear derailleur on a mountain bike can seem like a daunting task, especially for beginners. But with the right tools, a little bit of patience, and some guidance, anyone can do it. In this article, we will provide a step-by-step guide on how to install a rear derailleur on your mountain bike.
A rear derailleur is one of the most important components of your bike’s drivetrain system. It is responsible for shifting the chain from one gear to another and helps you maintain a steady speed while riding. As such, it is important to ensure that your derailleur is installed correctly to ensure smooth and efficient gear changes. So whether you are looking to replace an old, worn out derailleur or to upgrade to a newer, better one, this article has got you covered!
Understanding Rear Derailleurs and Their Parts
Rear derailleurs are one of the most important components of a mountain bike and are responsible for shifting gears on the rear wheel. Essentially, a rear derailleur is a mechanism that allows the chain to move up and down the rear cassette, which then adjusts the resistance of the pedals.
To understand how to install a rear derailleur properly, you must first become familiar with its parts. A rear derailleur is made up of a cage, jockey wheels, a parallelogram, and spring mechanism. The cage is the attached arm that moves the chain. The jockey wheels are located within the cage and are responsible for pulling the chain from one gear to another. The parallelogram helps the derailleur move smoothly, and the spring mechanism provides tension to keep everything in place. Understanding these parts is essential for installing a rear derailleur correctly, and also help with troubleshooting any issues that may arise during installation or use.
Read Also: How to Successfully Add Disc Brakes to a Mountain Bike: A Comprehensive Guide
Tools You Need to Install a Rear Derailleur
Before you start installing your rear derailleur, it is important to make sure that you have all the necessary tools and equipment. Here are the essential tools that you will need to install a rear derailleur on your mountain bike:
1. Hex wrenches – A set of hex wrenches in various sizes will come in handy for loosening and tightening bolts on your bike.
2. Chain tool – If you need to remove or install a new chain, a chain tool is an essential tool that you will need.
3. Pliers – Pliers are useful for holding cables and housing in place while installing the rear derailleur.
4. Cable cutters – You may need to cut the cable and housing to the correct length while installing the rear derailleur.
5. Screwdrivers – Different screwdrivers such as flathead and Phillips head screwdrivers may be required to adjust the derailleur.
Having these tools handy will make the installation process smoother and quicker. It is important to ensure that you have the correct sizes for each tool, to avoid damaging any bolts or other components of your bike. With the right set of tools, you’ll be able to install the rear derailleur efficiently and correctly.
Removing Your Old Rear Derailleur
Before installing a new rear derailleur on your mountain bike, it is important to first remove the old one. Removing the old derailleur may seem intimidating, but it is a fairly straightforward process.
Start by shifting your bike to the smallest cog on the cassette. Then, use a 5mm Allen key to remove the bolt that holds the cable in place. Next, use a 4mm Allen key to loosen the bolt that attaches the derailleur to the derailleur hanger. Gently slide the derailleur off the hanger and remove it from the bike. Be sure to keep all the small parts and bolts in a safe place, as you will need to reuse them when installing your new derailleur. By properly removing your old derailleur, you will be one step closer to installing a smooth and efficient new one on your bike.
You may also like: How to Determine the Right Size Mountain Bike for You
Mounting Your New Rear Derailleur
Mounting your new rear derailleur is one of the most crucial steps in the installation process. To begin, ensure that your bike’s rear derailleur hanger is straight and undamaged. If there is any visible damage, replace it before proceeding any further. Next, align the derailleur with the hanger and secure it using the bolt provided. Be sure to tighten the bolt to the recommended torque setting using a torque wrench.
Once the derailleur is firmly attached, it’s time to thread the chain through the derailleur’s pulley wheels. To do this, shift your bike into the largest cog in the rear and the smallest cog in the front. Then, thread the chain over the derailleur’s top jockey wheel. Guide the chain through the derailleur’s bottom jockey wheel, and then finally, attach the chain back to the bike’s rear cassette. Ensure that the chain is properly tensioned, and give it a few test shifts to ensure everything is working smoothly.
Adjusting Your New Rear Derailleur
Adjusting your new rear derailleur is one of the most crucial steps in ensuring your mountain bike functions properly and safely. The first step in adjusting your derailleur is to shift the chain to the smallest cog on the rear cassette and the smallest chainring at the front. This will loosen the derailleur cable, allowing you to adjust the high limit screw on the derailleur.
To do this, turn the high limit screw clockwise until the derailleur pulley lines up with the smallest cog on the cassette. Then, shift up to the largest cog on the cassette and the largest chainring at the front. The derailleur should shift smoothly up through the gears without overshooting. If it does overshoot, you will need to adjust the cable tension using the barrel adjuster on the derailleur. With these quick and easy adjustments, you will have your new rear derailleur working smoothly and perfectly in no time.
Troubleshooting Common Rear Derailleur Problems
Subheading: Troubleshooting Common Rear Derailleur Problems
After installing your rear derailleur, there might be issues that arise along the way. Some of the most common issues include misalignment, chain skipping, and poor shifting. Misalignment is typically caused by the derailleur hanger being bent or the derailleur not being attached properly. To fix this problem, you will need to straighten out the hanger or adjust the derailleur attachment.
Chain skipping, on the other hand, is usually caused by a worn-out chain or cassette. To fix this, you will need to replace the chain or cassette. Lastly, poor shifting can be caused by a variety of factors such as cable tension, dirty cables, or bent derailleur hangers. To diagnose the problem, you will need to inspect each individual component and make appropriate adjustments. With proper troubleshooting techniques, you will be able to enjoy smooth and efficient shifting on your mountain bike.
Related Post: How to Safely Put Your Mountain Bike on a Bike Rack for Your Next Adventure
Tips and Tricks for Maintaining Your Rear Derailleur
Proper maintenance of your mountain bike’s rear derailleur is crucial to ensure optimum performance and longevity. Here are some tips and tricks to help you maintain your rear derailleur.
Firstly, always keep your derailleur clean and free of debris. This can be done by using a soft-bristled brush to remove any dirt or grime buildup. Additionally, make sure to lubricate the pivot points with a good quality lubricant to ensure smooth shifting. Secondly, regularly check the alignment of your derailleur hanger. Misaligned hangers can lead to inaccurate shifting and even damage to the derailleur. Lastly, always check the tension of your derailleur cable. Over time, cables can stretch or become loose, affecting the accuracy of your shifting. Regularly checking the cable tension and making necessary adjustments can improve the performance of your rear derailleur. By following these simple tips, you can ensure that your rear derailleur performs at its best and lasts for years to come.
Final Words
Installing a rear derailleur on your mountain bike is not rocket science. With proper attention to detail, you can accomplish this task with ease. Take your time to understand the different components and their functions, and you will soon be confident to install the rear derailleur by yourself.
Remember, if you’re not comfortable doing it yourself, seek the help of a professional. Whether you install it yourself or with the help of a pro, you’ll be amazed at how much of an impact a correctly installed rear derailleur can have on your bike’s performance. So, take the plunge, and enjoy the thrilling ride of your newly installed rear derailleur!