Mountain biking is an exciting sport that not only offers endless adventure but also comes with its share of gear-related challenges. One of the most common problems experienced by mountain bikers is a punctured or flat tire. While a flat tire can be frustrating, there’s no need to panic since it’s a common issue that’s easy to fix.
In this article, we’ll share with you a quick and easy guide on how to change an inner tube on your mountain bike. Whether you’re a newbie or an experienced rider, you’ll find this guide handy the next time you experience a flat tire on your ride. With just a few simple tools and a spare inner tube, you can get your ride back on track in no time!
Gather the Necessary Tools and Supplies
Gathering the necessary tools and supplies is an essential step when changing an inner tube on your mountain bike. You will need a few basic tools such as tire levers, a hand pump or a CO2 inflator, and a spare inner tube of the appropriate size for your bike. It’s always a good idea to carry these tools with you while riding in case of a flat tire.
To remove the tire from the rim, you will need to use the tire levers. Usually, a set of two or three levers will work best. Make sure that the inner tube matches the size of the tire for your bike. If you are unsure about the size of your specific bike, check the size printed on the side of the tire. Once you have gathered the necessary tools and supplies, you are ready to change the inner tube on your mountain bike, which will be explained in the next subheading.
Read Also: How to Assemble a Mountain Bike: Tips and Tricks for a Smooth Ride
Locate the Defective Inner Tube
Locating the defective inner tube on your mountain bike is essential before you replace it. To do this, first, remove any remaining air from the tire by pressing on the valve. Next, use a tire lever to pry the tire off the rim carefully. Now you can easily locate the puncture or tear in the inner tube.
If you cannot locate the puncture visually, fill a basin or tub with water and submerge the tube until air bubbles appear. These bubbles indicate the location of the puncture, making it easier to find and fix it. Once you have identified the defective inner tube, you can remove it, prepare the new one, and install it before re-inflating the tire. Remember to check your tire tread and ensure that it is wearing evenly to prevent similar punctures from happening again.
Remove the Wheel from the Bike Frame
When it comes to changing the inner tube on your mountain bike, the first step is to remove the wheel from the bike frame. This may seem like a daunting task, but it is relatively easy to accomplish with the right tools and know-how.
To start, loosen the quick-release lever on the wheel. This is typically found on the non-drive side of the bike frame, near the rear wheel or on the front fork. Once the lever is loose, you should be able to pull the wheel away from the frame. If you have through-axles instead of a quick release, use a hex key to loosen the bolts that hold the wheel in place. Once the bolts are loose, you can slide the wheel out of the frame. With the wheel removed, you can easily access the inner tube to change it out for a new one.
You may also like: How to effectively clean your full suspension mountain bike
Remove the Defective Inner Tube
The process of removing a defective inner tube from your mountain bike may appear daunting at first, but it’s relatively simple once you’ve done it a few times. Here’s what you need to do:
First, locate the valve on the inner tube, and then use a valve tool or your fingers to unscrew it from the valve stem. Next, press the small metal ball on the other side of the stem so that it pops out of the rim. This will remove the stem and valve from the tube. Once the valve has been removed, start working around the tire, gently pulling the tube out of the tire and the wheel rim simultaneously. You might need to use a tire lever to help you pry the tire off of the rim. Be careful not to pinch the tire with the lever, as this could cause further damage.
Once you’ve removed the damaged inner tube, it’s time to prep for the new one. Check that the tire is in good condition and remove any debris or objects that might have punctured the tube before you can fit the new one. Make sure that the new inner tube is correctly sized and that it’s designed to fit your tire. Then, tuck the tube into the tire and start fitting the tire back onto the rim. Inflate the tire slightly so that it holds its shape. Once it’s in place, simply reattach the valve and screw it back into the stem until it’s tight. Finally, inflate the tire to the manufacturer’s recommended pressure and give it a quick spin to ensure that everything is securely fitted into place.
Insert the New Inner Tube
After removing the old inner tube from the tire, you need to insert the new inner tube carefully. Start by inserting the valve stem through the valve hole in the rim. Make sure that the valve is straight and seated flat in the hole. Then, tuck the inner tube inside the tire, making sure that it is not twisted or pinched. If the tire has directional tread, make sure that the arrow points in the correct direction.
Once the tube is neatly tucked inside the tire, begin fitting the tire back onto the rim. Starting opposite the valve, push the bead of the tire onto the rim. Use your palms to push the tire, but be careful not to pinch the inner tube between the tire and the rim. Work around the wheel, alternating the sides and gradually pushing each section of the tire onto the rim until the tire is completely seated. Finally, inflate the tire to the recommended pressure and check for any bulges or deformities that could cause a flat on your next ride.
Reattach the Wheel to the Bike Frame
After replacing the inner tube, the next step is to reattach the wheel to the bike frame. First, align the wheel with the fork dropouts and insert the axle into the dropouts while holding it firmly in place. Next, tighten the axle nuts or quick release lever with a wrench or your fingers, depending on your bike model, and make sure they are secure. If you’re using a quick release lever, make sure the lever is in the closed position.
After securing the wheel, check that it spins freely and is centered. If you have disc brakes, it’s vital that you make sure the rotor is aligned correctly between the brake pads. If not, adjust the rotor until it’s straight by loosening the brake caliper and sliding it to the correct position. Finally, check that the tires are inflated to the recommended pressure and give the wheel a final spin test. With these simple steps, you should be able to reattach the wheel to the bike frame and enjoy a smooth ride.
Related Post: Best Street Mountain Bikes: Riding the City in Style
Inflate the New Inner Tube and Test Ride the Bike
After successfully inserting the new inner tube, it’s important to inflate it to the recommended PSI (pounds per square inch). Most mountain bike tires have a PSI range between 30-50. Over or under-inflating the tire will affect the performance of your bike. Use a bike pump with a pressure gauge to ensure you are inflating to the appropriate level.
Once the tire is inflated, it’s time to test ride your bike. Roll the bike back and forth to ensure the tire is seated properly. Take a short ride around your neighborhood to ensure the tire is holding air and there are no issues with the wheel or tire. If the tire feels stable and there are no strange noises or vibrations, you’re good to go! Always make sure to carry a spare inner tube and a pump on long rides, just in case you encounter any issues while on the trail.
The Bottom Line
Changing the inner tube of a mountain bike can seem intimidating for beginners, but with the right tools and some practice, it can be done quickly and easily. By following the step-by-step process outlined in this article and practising on easier terrain, even novice riders can become self-sufficient and confident in their bike maintenance skills.
It’s worth investing in a good quality pump and spare inner tubes, as punctures can happen frequently when mountain biking. Carrying these tools with you on rides can save time and money in the long run. By learning to change an inner tube yourself, you’ll be able to quickly fix any issues that arise while riding and enjoy a smoother, more reliable experience on the trails.