Mountain biking is an exhilarating and adventurous activity that has gained immense popularity over the years. As with any other extreme sport, mountain biking requires great skill and proper equipment to ensure a safe and comfortable ride. One of the most critical parts of a mountain bike is the back wheel, as it provides the driving force and stability to the bike.
At times, you may need to replace or repair your mountain bike’s back wheel. However, many bikers find this task daunting, and they often opt to take their bike to a professional mechanic rather than doing it themselves. In this article, we will walk you through the quick and easy steps involved in putting a back wheel on a mountain bike. With some basic knowledge and a few simple tools, you can complete this task efficiently and effectively.
Gather Your Tools and Equipment
To start, it is important to make sure you have all the necessary tools and equipment when putting a back wheel on a mountain bike. You will need a bike repair stand to hold the bike steady while you work on it. If you do not have a bike repair stand, you can improvise by leaning the bike against a wall or upside down on its handlebars and seat.
Other important tools include a quick release skewer or a standard skewer, depending on your bike’s specifications. You will also need a wrench or pliers to remove the old wheel and install the new one. Finally, it is important to have a tire lever or two to help you remove the tire from the rim, and a pump or CO2 cartridge to inflate the tire back to the proper pressure once the new wheel is on. With these tools and equipment gathered, you are ready to move on to the next step and remove the old wheel from your mountain bike.
Read Also: How Often Should You Clean Your Mountain Bike?
Remove the Old Wheel from the Bike
Removing the old wheel from a mountain bike is the first step towards putting a new back wheel. The process is pretty straightforward and can easily be done by anyone with the right tools and a little bit of knowledge.
Start by turning your bike upside down and place it on a flat surface that will not get scratched. Shift the chain to the smallest chainring and the smallest cog of the cassette. Once you have done that, use a wrench to loosen the bolts that attach the wheel to the frame. Some bikes come with a quick-release system, which can be released by pushing the lever. With the bolts loose, lift the bike up, and remove the wheel from the frame. Ensure that you keep the bolts safe, so you don’t lose them while replacing the wheel. With the old wheel out of the bike, you can move to the next step of fitting the new wheel.
Prepare the New Wheel for Installation
Before installing the new back wheel, you must first prepare it properly. Begin by inspecting the wheel for any defects or damages. Ensure that all the components, such as the cassette and rotor, are clean and in good condition. This will help ensure the longevity of the new wheel.
Next, if the wheel did not come preloaded with a cassette, you will need to install one. Use a cassette locking tool to securely tighten the cassette onto the hub. Be sure to apply the correct torque to the lockring to prevent it from slipping while riding. Once the cassette is installed, place the rotor on the hub and torque it to the manufacturer’s specifications. After the wheel is fully prepared, move on to the next step of installation with confidence in the newly-installed components.
You may also like: How to Adjust Front Suspension on Your Mountain Bike for a Smoother Ride?
Install the New Wheel onto the Bike
Once you have the new wheel in hand and the axle firmly in place, it’s time to attach it to your mountain bike. Start by lining up the disc brake rotor on the wheel with the caliper on the frame, making sure that they are positioned correctly. Then, slide the axle through the dropouts on your frame, and carefully feed your chain onto the sprockets.
Next, use the quick release skewer to secure the axle in place. Tighten it up by turning the lever clockwise, but don’t make it too tight. You want it snug enough to keep the wheel in place but also loose enough so that you can still spin the wheel freely. Once the quick release is properly adjusted, give the wheel a spin to make sure everything is running smoothly and that it is securely attached to the bike.
Tightening the Wheel and Adjusting the Brakes
Once the wheel is in place on your mountain bike, it’s time to tighten it properly. Tightening the wheel will make sure that it is well secured and doesn’t wobble during your ride. To do that, you need to flip your bike over and get out your trusty wrench. You’ll want to tighten the bolts on your wheel evenly, applying equal pressure to each bolt. Tighten each bolt partially before fully tightening one at a time, going in a diagonal direction to prevent any warping of the wheel. Repeat this process until all bolts are tightened as much as they can be. For the best results, it’s essential to use a torque wrench since it allows you to tighten the bolts to the correct specification.
Once your wheel is secure, it’s essential to check your bike’s brakes, which may have become misaligned during the wheel removal process. To do this, you need to spin your wheel and look at the brake pads. The pads should be parallel to the rim and not touching the tire. If the pads are too high or too low, you need to adjust them by tightening or loosening the brake’s natural position. It is recommended to test the brakes by squeezing them to ensure that they work correctly. Additionally, make sure that your brake levers are not too far out so that they are easy to reach but not too sensitive. By tightening the wheel and adjusting the brake pads, your mountain bike is now ready to hit the trails.
Test Ride Your Bike to Ensure Proper Functioning
Once you have successfully installed the rear wheel, it is important to do a test ride to ensure proper functioning. A quick test ride will help you identify if the wheel is properly aligned and if the brakes are working properly. Moreover, it will help identify any other issues before you hit the trail.
During the test ride, check to see if the wheel is spinning freely with no wobbling. Also, check if the brakes are responding when you squeeze the levers. It is also important to shift through all the gears to ensure that the gear changes are smooth and efficient. If you notice any issues during the test ride, make the necessary adjustments before hitting the trail. Once you are satisfied with the performance of the rear wheel, you can confidently hit the trails and enjoy your ride.
Related Post: Best MTB Mountain Bikes: Top Picks for Off-Roading Adventures
Maintenance and Repair Tips for Your Mountain Bike
To keep your mountain bike in good working condition, regular maintenance and repair is essential. Here are a few tips to ensure your bike remains reliable and safe on the trails.
Firstly, keep your bike clean and dry after each ride. Dirt and debris can cause wear and damage to the chain, brakes, and other components. Secondly, check the tire pressure regularly. Adequate tire pressure is critical for a smooth and comfortable ride, and also helps to prevent punctures. Finally, inspect the brakes and gears regularly. Adjusting or replacing these components when necessary can prevent accidents and increase the longevity of your bike. By following these simple maintenance tips, you can keep your bike in top condition and enjoy a safe and fun ride every time.
Final Words
In conclusion, putting a back wheel on a mountain bike might seem like a daunting task for beginners, but it is essential to learning how to maintain and repair your bike. The key to successfully replacing the back wheel is carefully following the steps and being patient to avoid making any costly mistakes.
Remember to check the alignment of the wheel and tighten the bolts to prevent any accidents or injuries while riding your bike. Additionally, it is crucial to regularly inspect the wheels and other components of your bike to ensure it is safe to ride. With practice, you will find that putting a back wheel on a mountain bike is an easy task that can be done on your own. So, take the time to learn this skill, and you can save yourself time and money in the long run, as well as enjoy a more rewarding and comfortable cycling experience.