Whether you’re an experienced biker or just getting started, it’s essential to know how to put a chain on your mountain bike. A good chain is vital for the proper functioning of your bike and getting the most out of your rides. The process of putting a chain on your bike might sound daunting, but with the right tools and a bit of know-how, it’s a straightforward task.
This step-by-step guide will walk you through the process of putting a chain on your Mongoose mountain bike. Whether you’re a seasoned cyclist or a beginner, you’ll find this guide easy to follow and helpful. So, let’s get started and get your bike ready to ride in no time!
Gathering the Necessary Tools and Equipment
Before putting a chain on your Mongoose mountain bike, it is important to gather all the required tools and equipment to ensure a smooth and hassle-free process. You will need a few basic tools such as a chain tool, a Phillips screwdriver, and a wrench. In addition to these, you will also require a new chain that is compatible with your Mongoose bike.
A chain tool is an important tool that helps you remove the old chain and install the new one. It is essential to have a new chain that’s compatible with your bike to ensure a perfect fit. Most Mongoose mountain bikes use 9-speed chains, and it is recommended to have a chain of the same length and width as the original one. Once you have all the necessary tools and equipment ready, you can move on to the next step of installing the chain on your Mongoose mountain bike.
Read Also: What Size Mountain Bike Frame Should I Get? A Guide to Finding the Right Fit
Removing the Old Chain from the Bike
When you start working on your bike chain, the first thing you need to do is remove the old one from your Mongoose mountain bike. This can be accomplished with a chain tool or pliers. To start, locate the quick link or master link on the chain. This link will have a pin that is easier to remove than the regular chain links. If your chain does not have a quick link, you will need to use your pliers to break a regular link.
Next, position your chain tool on the pin that goes through the link and turn the tool’s handle to push the pin out. You will need to turn the tool’s handle several times to push the pin through the chain link. Once the pin is out, you can use your hands to disconnect the chain from the bike’s cassette and derailleur. Take the old chain off the bike and discard it. Now, you have removed the old chain entirely and are ready to install a new one.
Measuring and Cutting the New Chain to Size
Measuring and cutting the new chain to size is a crucial step to ensure that the chain fits perfectly on your Mongoose mountain bike. Before buying a new chain, make sure to determine its length first. To do this, count the number of links on the old chain and match it with the new one. It is important to get the exact same length to prevent the chain from being too loose or too tight.
Once you have the new chain, remove any excess links that surpass the required length. Use a chain breaker tool to push the chain pins out and remove the unwanted links. Remember to measure twice before cutting once. It is better to cut conservatively and remove more links later rather than cutting too much and ending up with a chain that’s too short. Once the new chain is cut to the right size, it is ready to be installed on your Mongoose mountain bike.
You may also like: Best Mountain Bike Shorts with Chamois for Comfortable Riding Experience
Fitting the New Chain onto the Bike’s Drive Train
Fitting the new chain onto your Mongoose mountain bike’s drive train is not difficult, but it requires careful attention to details and the right tools for the job. Before starting, place the bike on a workstand or stable surface to make the process easier. Begin by removing the old chain from the bike and measuring the new chain to match the length of your old one. Make sure to run the new chain through the derailleur pulleys in the correct orientation.
Next, align the chain on the cassette and chainring, ensuring that it is seated correctly and in the right position. Many Mongoose mountain bikes come with a quick-release mechanism to lock the wheel in place, which can make the process simpler. Finally, test the new chain by pedaling gently and smoothly shifting through all gears to ensure that the chain is running correctly on the bike’s drive train. If you encounter any issues, check the chain tension, alignment, or make small adjustments to the derailleur as required. With a little patience and attention to detail, fitting a new chain onto your Mongoose mountain bike should be a straightforward task.
Adjusting the Chain Tension for Optimal Performance
After you’ve successfully put the chain onto your Mongoose mountain bike, it’s important to adjust the chain tension. This is crucial for optimal performance as it ensures your bike can shift gears smoothly and efficiently. A slack chain can cause your gears to slip, while a tight chain can cause excessive wear on the chain and other components.
To adjust the chain tension, you’ll need to loosen the rear wheel axle nuts and slide the wheel forward or backward until the chain tension is just right. A good way to check the tension is to grab the chain at the midpoint between the front and rear sprockets and pull upwards. The chain should move approximately 1 inch up and down. Once you’ve adjusted the chain tension to your liking, tighten the rear wheel axle nuts and give the chain a final check. With the proper chain tension, you’ll be able to enjoy a smooth, effortless ride on your Mongoose mountain bike.
Testing the Chain to Ensure Proper Installation
Once you have completed the installation process, it is important to test the chain to ensure that it has been properly installed. To begin this process, shift your bike into the chain’s smallest chainring in the front and the largest cog in the rear. Then, make sure that the chain is sitting properly on the chainring and that it is fitting snugly onto the rear cog.
Next, test the chain by slowly rotating your pedals. If the chain is working properly, it should move smoothly through the gears. Additionally, you should check that there is no skipping or jumping between gears, as this can indicate that the chain is not properly installed. Once you have tested the chain and found that everything is working as it should, you can confidently take your Mongoose mountain bike out for your next adventure.
Related Post: Best Mountain Bike Armor: Protect Yourself on the Trails
Proper Maintenance Tips to Keep Your Chain Running Smoothly
Proper maintenance of your bike chain is essential to its longevity and overall performance. Keeping your chain clean and lubricated will help it run smoothly and prevent unnecessary wear and tear.
To maintain your chain, start by regularly cleaning it with a degreaser and a brush. Wipe off any excess dirt or debris and inspect for any damage or rust. After cleaning, apply a high-quality lubricant to the chain and wipe off any excess. It is important to not over-lubricate the chain as this can attract more dirt and debris. Finally, avoid excessive gear shifting or putting too much pressure on the chain, as this can cause it to stretch and wear out faster. By following these simple maintenance tips, you can extend the life of your bike chain and keep your rides smooth and enjoyable.
Wrapping Up
Putting a chain on a mongoose mountain bike might seem like a daunting task, but with the right tools and techniques, it can be a simple and straightforward process. First, make sure you have the right size and type of chain for your specific bike model. Then, loosen the rear axle and remove the old chain before threading the new chain through the derailleurs and onto the cassette. Finally, adjust the chain tension and tighten the axle to secure the chain in place.
Taking the time to properly install a new chain on your mongoose mountain bike can extend the life of your bike and ensure a smoother, more efficient ride. With practice and patience, you’ll soon be able to change your bike chain with ease and confidence. Just remember to take safety precautions and double-check your work before hitting the trails. Happy cycling!