If you are passionate about mountain biking, you know that changing a flat tire is an important skill to have. It is not uncommon to experience flat tires while taking on the roughest terrains and trails. One of the toughest aspects of fixing a flat tire is putting the tire back on, especially if it’s the rear tire of a mountain bike. In this article, we will provide you with a step-by-step guide on how to put back tire on mountain bike.
We will take you through the entire process of how to remove the damaged tire, fix the puncture or replace the inner tube, and reinstall the tire on your mountain bike’s rear wheel. With this guide, you can confidently tackle any flat tire situation, whether you’re out on a trail or in the comfort of your garage. So, let’s dive in and equip you with the necessary skills to get back on your bike in no time.
Gather Your Tools and Materials
Gathering your tools and materials is the first step to putting back tire on your mountain bike. You’ll need a few essential tools, including a bike stand, a tire lever, a puncture repair kit, and a pump. You can purchase these tools from your local bike shop or online. Additionally, you’ll want to make sure you have a replacement tube or patch kit in case your tire has a puncture.
It’s important to choose the correct tire size for your mountain bike. You can find the tire size listed on the sidewall of your existing tire. Make sure you get the correct width and diameter to avoid any issues when fitting the new tire. Once you have gathered all necessary tools and materials, you’re ready to begin the process of putting back your tire on your mountain bike.
Read Also: What is an Enduro Mountain Bike Race and How to Prepare for It
Remove the Old Tire
In order to put a back tire on a mountain bike, the first step is to remove the old tire. This is a relatively easy process, but it requires some basic tools and a little bit of patience. The first thing you need to do is release the brake cable by squeezing the brake caliper and opening the brake arms.
Once the brake cable is released, you need to deflate the tire completely and use a tire lever to remove the tire from the rim. You can start anywhere on the tire and work your way around, pulling the bead of the tire off of the rim. Be careful not to damage the tube when removing the tire, as this can cause a puncture or air leak. After the tire is removed from the rim, the old tube can be removed from the tire. With the old tire and tube removed, you are now ready to proceed with installing the new tire and tube.
Insert the New Inner Tube
After removing the tire and inspecting it for any damage, it’s time to insert the new inner tube. Firstly, check the valve on the new tube and ensure that it matches the valve hole on the rim. Next, insert the valve through the rim hole and apply the locking nut to hold it in place. Make sure the tube is not twisted before inserting it into the tire. Slowly and carefully push the tube into the tire before tucking the remaining section inside the tire’s rim.
Once the inner tube is evenly seated inside the tire, you can begin to place the tire back onto the rim. Be cautious not to pinch the inner tube between the tire and the rim as it can cause a flat tire. Inflate the tube slightly before tucking the tire bead into the rim entirely. Finish by applying pressure to the tire and double-checking that everything is correctly aligned and tightened. Remember, putting back a tire on a mountain bike requires patience and some effort, so take your time and avoid rushing the process.
You may also like: What Does a Hardtail Mountain Bike Mean: A Beginner’s Guide to Off-Road Riding
Put the New Tire on the Rim
Putting the new tire on the rim is a crucial step in changing a mountain bike tire. First, you must make sure that the tire is properly aligned with the rim. Take the tire and place one side of it into the rim groove. Then, using your thumbs, push the opposite side of the tire onto the rim, working from one side to the other. Make sure that the tire is seated evenly to avoid any bulging or warping.
Next, you will need to inflate the tire to the recommended pressure level. Use a bicycle pump and ensure that the tire is seated properly around the rim. Double-check that the tire is evenly aligned on the rim and that it spins freely without rubbing against the bike frame or brake pads. Once you are satisfied that everything is in order, you are ready to hit the trails with your newly installed mountain bike tire.
Inflate the Tire
After successfully installing the back tire on your mountain bike, it’s time to inflate the tire. Before you begin, make sure you check the recommended PSI (pounds per square inch) for your specific tire model. You can usually find this information printed on the side of the tire or in the manufacturer’s manual.
To inflate the tire, remove the valve cap from the valve stem on the inner tube. Using a bike pump, attach the nozzle to the valve stem and pump air into the tire. It’s important to keep an eye on the PSI as you inflate the tire and stop pumping once you’ve reached the recommended pressure.
Once the tire is inflated, replace the valve cap and give the tire a quick spin to ensure it’s rotating smoothly and evenly. Riding with an underinflated or overinflated tire can cause damage to the tire and affect your riding performance, so it’s important to regularly check and maintain proper tire pressure.
Check for Proper Alignment
After you have placed the tire onto the wheel, it’s important to check the alignment of the wheel so that it rolls smoothly and doesn’t wobble. To do this, stand behind the bike and look down the length of the bike’s frame and through the spokes of the wheel. You should be able to see an even gap between the tire and the frame on both sides.
If the gap is uneven, it means that the wheel is not aligned properly. To fix this, loosen the axle nuts or skewer, hold the wheel steady, and gently push it to the side that needs adjustment. Tighten the nuts or skewer and check the alignment again. Repeat the process until the wheel spins evenly and there is an even gap between the tire and the frame on both sides. Checking the alignment of your back tire is a simple process that can ensure a more comfortable and efficient ride.
Related Post: How to Adjust Brake Levers on a Mountain Bike: A Comprehensive Guide
Tips for Preventing Future Tire Issues
Preventing future tire issues is vital for avid mountain bikers. The following tips will help you avoid common problems that may occur with your tires. First, make sure you have the appropriate tire pressure for your bike and the terrain you plan to ride on. This will decrease the risk of punctures and improve traction, leading to a more comfortable, safe ride. Consider investing in high-quality tires that are durable and can withstand rugged terrain.
Second, regularly inspect your tires for any damage, such as cuts, cracks, or punctures. Repair or replace any damaged areas as soon as possible to avoid larger issues later on. Additionally, make sure to clean your tires after each ride as dirt and debris can wear them down faster.
By following these tips, you can enjoy a smooth and safe ride on your mountain bike without worrying about unexpected tire problems. Remember, prevention is always better than a cure, so take the time to properly maintain your tires to prevent any issues from arising in the future.
Final Verdict
In conclusion, replacing your mountain bike’s back tire may seem intimidating at first, but with the right tools and a little bit of know-how, it can be a straightforward process. Make sure to take your time and follow the steps carefully, and don’t hesitate to reach out to a professional if you need assistance.
Once you’ve successfully replaced your back tire, you’ll likely feel a sense of accomplishment and confidence in your ability to maintain your bike. Remember to regularly inspect your tires for wear and tear, and stay on top of any necessary repairs to ensure a smooth and safe ride. Happy cycling!