Mountain biking is a thrilling and adventurous sport, but it requires regular maintenance. One of the most common issues faced by riders is the chain coming off the bike while cycling. It can be frustrating and can hamper your cycling experience if you don’t know how to fix it. However, putting the chain back on your mountain bike is a relatively simple task that can be done quickly with a few basic tools and some knowledge.
In this article, we will discuss easy-to-follow steps that will help you put the chain back on your mountain bike with minimal effort. Whether you are a beginner or a pro rider, this guide will be useful to get your bike back on the road and keep you going on your rides. So, let’s dive in and explore the simple and effective ways to put the chain back on your mountain bike.
Basic Knowledge About Your Bike Chain
The first step in understanding how to easily put the chain back on your mountain bike is to have some basic knowledge about your bike chain. The chain on your bike is a critical component that transfers power from the pedals to the wheel. Chains are made up of links that fit together to create a continuous loop.
It’s essential to know that bike chains should always be kept clean and lubricated. A dirty or dry chain can cause excess wear and tear on your bike’s gears, leading to costly repairs. Regular maintenance of your chain is necessary to keep it functioning correctly. Keeping your chain clean and well-lubricated not only extends its lifespan but also ensures your bike runs flawlessly. Understanding the basic knowledge of your bike chain will let you easily fix the issues related to it and extend the lifespan of your chain.
Read Also: How to Remove a Mountain Bike Front Wheel with Disc Brakes: A Step-by-Step Guide
How to Identify Chain Damage
The first step in fixing a chain issue on your mountain bike is identifying the problem. Chain damage can be caused by a variety of factors such as wear and tear, improper alignment, or debris getting stuck in the chain. Some signs of chain damage include a chain that skips gears or feels stiff when pedaling, a chain that is loose or too tight, or a chain that appears to be broken or have missing links.
To identify chain damage, start by inspecting your chain visually. Look for any signs of wear or tears, rust or corrosion, and twisted or bent links. Then, test your chain by turning the pedals and shifting through gears to see if it is running smoothly. If you notice any issues, try adjusting the tension or alignment of the chain before replacing it entirely. With the right approach and attention to detail, you can quickly identify chain damage and take the necessary steps to ensure that your mountain bike is in peak condition.
Essential Tools and Equipment to Re-Fit the Chain
Re-fitting a bike chain is quite a simple task, provided you have the right set of tools. The essential tools to put the chain back on your mountain bike include a few basic things that most biking enthusiasts already have in their toolbox. Firstly, you need a chain tool – this tool is designed specifically for removing and re-fitting a chain. This tool has a rotating spindle that pushes out or drives in chain pins, allowing you to disconnect or join the chain. Secondly, you need a pair of pliers, preferably slip-joint or needle-nose pliers, to hold the chain in place as you push in the new pin. Make sure you have a spare pin as well, just in case you lose the original one.
Apart from the basic tools, it’s always a good idea to keep extra supplies handy. A spare chain link, a set of hex wrenches or Allen keys, and a rag are some useful items to keep in your bike repair kit. A clean rag will help wipe off excess oil, dust, and dirt before fixing the chain. With these tools and equipment by your side, you can quickly get your chain back on track in no time.
You may also like: Best Mid Range XC Mountain Bikes: Top Picks for Performance and Value
Step-by-Step Guide to Remove the Chain
In order to put the chain back on your mountain bike, it may be necessary to first remove the chain. This can seem daunting, as the chain is typically one of the more complicated parts of the bike. However, with a few simple steps, the chain can be removed quickly and easily.
The first step in removing the chain is to shift the bike into the smallest chainring and the smallest rear cog. This will create the slack necessary to remove the chain from the bike. Next, use a chain tool to push out one of the chain pins. This should be done carefully, as too much force can cause the pin to snap. Once the pin is out, you can pull the chain apart and remove it from the bike.
How to Re-Fit the Chain on the Rear Cassette
One of the most common problems a mountain biker can face while riding is the chain coming off the rear cassette. This can be caused due to the chain being too loose or the bike being too rough on the trails. However, fixing the chain is a quick and easy process that can be done on the go.
To put the chain back on the rear cassette, start by pulling the rear derailleur back with your left hand. This will create enough slack in the chain to slip it back onto the cog. While keeping the derailleur back, use your right hand to guide the chain back onto the smallest cog. Once the chain is in place, release the derailleur, and slowly pedal the bike to ensure the chain moves through all the gears without any issues. By following these simple steps, you can easily re-fit the chain back on the rear cassette in no time and continue with your mountain biking adventure.
Tips for Re-Fitting the Chain on the Chainrings
When it comes to refitting the chain on the chainrings, it’s important to take your time and do it correctly to avoid any further irritation or accidents. Firstly, make sure that your bike chain is free of any visible muck or grit. Use a clean rag or a brush and some soapy water to wipe down the chain. This will allow the chain to smoothly run on the chainrings and prevent any jerking or noise.
Once the chain is clean, position the chain on the largest chainring. Use the bike’s rear derailleur and shift the chain onto the smallest sprocket. Gradually ease the chain downwards by pedaling the bike counter-clockwise. The chain should easily settle onto the teeth of the chainring. Make sure that the chain is secure and test pedaling to ensure that the chain runs smoothly without any jerks or slack. Taking the time to adequately refit the chain on the chainrings will give you peace of mind knowing that your bike is safe and ready to ride.
Related Post: How Many Inches is a Medium Mountain Bike Frame? A Comprehensive Guide for Bike Enthusiasts
The Final Check-Up – Checking the Tension and Lubricating the Chain
Once you’ve successfully put your chain back on your mountain bike, it’s important to give it a final check-up before heading out on your next ride. The first thing you should do is make sure the tension of the chain is correct. The chain should not be too loose or too tight. To check the tension, push down on the middle of the chain with your finger and see how much it moves. If it moves too much or not at all, you’ll need to adjust the tension using the rear derailleur. Refer to your bike’s manual or online resources for instructions on how to do this.
After checking the tension, it’s a good idea to lubricate the chain. A well-lubricated chain will not only prolong its life but also make for a smoother and quieter ride. Use a quality bike chain lubricant and apply it to the chain while rotating the pedals backwards. Make sure to wipe off any excess lubricant with a clean rag – you don’t want it to attract dirt and debris on your next ride. With these final steps, your chain should be in good working order and ready to hit the trails.
Wrapping Up
Putting a chain back on a mountain bike is an essential task every rider must know how to do. By following the steps outlined in this article, you can quickly and easily fix a loose or fallen chain without the need to visit a mechanic. Make sure to regularly check the condition of your bike’s chain and keep it clean and lubricated, as this can prevent chain issues from occurring in the first place.
Remember, practice makes perfect, and the more you do it, the quicker and more efficient you will become at fixing your bike’s chain. So, grab your tools and get started on getting back on the trails with your mountain bike. With a little bit of patience and practice, you’ll be back on the road in no time. Happy cycling!