Mountain biking has become an increasingly popular sport in recent years, and it’s easy to understand why. The thrill of careening down hillsides and navigating challenging terrain can be addictive, and with the right equipment, it can also be safe. One essential component of any mountain bike is the chain, which connects your pedals to your wheels and propels you forward.
If you’re new to mountain biking or you’ve never had to replace a chain before, you might be unsure of how to properly put on a new one. Fortunately, it’s not as complicated as you might think. By following a few simple steps, you can install a chain on your mountain bike and ensure that your rides are smooth, efficient, and safe. In this article, we’ll provide a detailed guide to putting on a chain that you can follow step by step, whether you’re a beginner or an experienced rider.
Essential Tools for Putting on a Chain on a Mountain Bike
Having the right tools is crucial when it comes to putting on a chain on a mountain bike. So, before you start the process, it’s important to make sure that you have the following essential tools at your disposal.
First and foremost, you will require a chain tool. This tool is essential for breaking the chain and for shortening it. You will also need a chain gauge or a ruler to measure the length of the chain. Additionally, you will require a pair of pliers to remove any pins or damaged links. A pair of latex gloves will also be useful to keep your hands clean while working. And finally, a degreaser or cleaning solution should be available to clean the chain before installation. With all these tools at hand, you can confidently proceed with the rest of the chain installation process.
Read Also: How to Effortlessly Remove Rear Mountain Bike Tire: A Beginner’s Guide
Checking Your Bike’s Chain Tension Before Installation
Before installing a new chain on your mountain bike, it’s essential to check the tension of the existing chain. The chain tension refers to the amount of slack in the chain when pulled away from the chainring. If the tension is too loose, the chain will jump off the chainring while riding, affecting your bike’s performance and safety. On the other hand, an overtightened chain will cause undue stress on your bike’s drivetrain, leading to reduced efficiency and increased wear and tear.
To check your chain’s tension, shift your bike to its smallest chainring at the front and the smallest sprocket at the rear. Pull the chain from under the chainstay and check the distance between the chain and the bottom of the chainring. Generally, the distance should be around 3-5mm, or you can compare it with a ruler or chain checker. In case the chain is too loose, you can adjust the tension using the rear derailleur or with the use of a chain tensioner tool. Make sure to adjust it evenly on both sides of the wheel for optimal performance.
How to Remove the Old Chain from a Mountain Bike
Removing the old chain from your mountain bike is an essential step in putting on a new chain. To safely remove the chain, you will need a chain tool that can be purchased from any bike store. Start by placing your bike on a stand or flipping it upside down. This will provide easy access to all parts of the bike.
Next, locate the master link, which is the link with a removable pin or clip. Use your chain tool to push the pin out of the master link. Once the master link is detached, remove the chain from the bike. It’s important to note that some chains may have multiple master links, so ensure you have removed all of them before taking off the chain. Now that the old chain has been removed, it’s time to clean the drivetrain before installing the new chain.
You may also like: Best Novice Mountain Bikes: A Guide to Starting Your Off-Road Adventure
Measuring and Cutting the New Chain for Your Mountain Bike
Measuring and cutting a new chain for your mountain bike is a crucial step in replacing the old chain. The first thing you need to do is measure the old chain’s length and determine the number of links required for the new chain. You can do this by measuring the chain’s length from one end to the other and counting the links in between. Add two links to this number to ensure that the new chain is long enough.
Next, you need to cut the new chain to the appropriate length using a chain tool. Ensure that you line up the tool accurately on the links you want to cut and tighten the tool’s pin carefully. Push the tool’s handle firmly until the chain pin pops out, and you can remove the extra links. Be cautious not to cut the chain too short, as this may cause issues when putting it back on your bike.
Step-by-Step Guide to Attaching a Chain to a Mountain Bike
Attaching a chain to your mountain bike might seem simple, but it’s important to follow the correct steps to avoid any potential damage or accidents. Here’s a step-by-step guide on how to properly attach a chain to your mountain bike.
First, ensure that your chain matches the size and type of your bike’s components. Then, remove any old or damaged chain and place your new chain around the cassette and chainring. Next, connect the chain’s ends using a chain tool and ensure it’s properly secured. Finally, check the chain tension and adjust as needed before taking your mountain bike out on the trail. By following these steps, you can safely and properly attach a chain to your mountain bike, ensuring smooth and efficient riding.
Testing and Adjusting Chain Tension and Gear Shifts
Testing and adjusting chain tension and gear shifts is crucial to ensuring a smooth and efficient ride on your mountain bike. After you have correctly installed your chain and set the derailleur, it is important to check the tension of the chain and adjust it as necessary. Improper tension can cause the chain to slip or jump off and result in an unsafe and frustrating ride.
To test the chain tension, shift to the smallest sprocket on the cassette and the smallest chainring. You should be able to lift the chain 1-2 centimeters from the bottom of the chainstay. If the chain is too loose or too tight, adjust the tension by either loosening or tightening the rear derailleur’s barrel adjuster. In addition to chain tension, it’s important to test and adjust the gear shifts to make sure they are smooth and precise. Ride through all the gears to ensure that each shift is clean and swift. If you experience skipping or slippage, you may need to fine-tune the derailleur or bring your bike to a professional mechanic for further adjustments.
Related Post: What Is the Difference Between Road and Mountain Bike Helmets?
Care and Maintenance Tips to Keep Your Mountain Bike Chain in Top Condition
Proper care and maintenance of your mountain bike chain is crucial to keep it functioning at its best performance level and to prolong its lifespan. Here are some essential tips for maintaining your mountain bike chain in top condition:
Firstly, always keep your chain clean and lubricated. A dirty and dry chain can cause friction and damage to your bike’s drivetrain. Clean it with a mild degreaser and a brush regularly and use a lubricant appropriate for the weather conditions in your area. Secondly, ensure that your chain is tensioned correctly. A loose chain can cause vibration and unnecessary wear on the chain and chainring teeth. Use a chain tension gauge to keep the tension correct and check it regularly. Lastly, check for chain wear regularly and replace it when necessary. A worn chain can lead to further damage to your bike’s chainring, cassette and derailleur. By following these simple tips, you can keep your mountain bike chain in top condition and enjoy smoother and efficient rides.
Final Words
Putting on a chain on a mountain bike may seem daunting, but with the right tools and steps, it can be a straightforward process. Remember to assess the state of your chain, clean it thoroughly, and remove any damaged links. Once you have a new chain correctly sized, ensure it is lubricated before fitting it onto your bike. By following these steps, you will guarantee a more enjoyable and safe ride.
It is essential to carry out regular maintenance on your mountain bike, including checking your chain’s condition. Replacing a worn-out chain can make a significant difference in your riding experience. With your newly acquired knowledge, go ahead and put on a chain on your mountain bike without fear. You will soon enjoy a smoother and safer ride on the trails without worrying about your chain jumping off. Remember to always prioritize safety and have fun. Happy riding!