Mountain biking is an adventurous and thrilling activity that demands proper maintenance and care of the equipment. One crucial aspect of maintaining a mountain bike is removing the crankset periodically to clean and lubricate it. The crankset is the component that connects the pedals to the bike’s drivetrain, and it is pivotal in providing power to the bike’s motion.
Removing the crankset typically requires a specialized tool known as a crank puller. However, if you are stuck in a situation without the puller, you might be wondering how to remove the mountain bike crank without puller. In this article, we provide a step-by-step guide on how to dismantle the crankset without using a puller. Read on to know more!
Tools Required for Removing a Mountain Bike Crank Without Puller
Removing a mountain bike crank without a puller can be challenging but with the right tools and technique, it can be done easily. The first thing you need is a 5mm Allen key that fits your crank bolts. This will be used to loosen the bolts that hold the crank arms in place. You will also need a rubber mallet to remove the crank arms from the bottom bracket spindle.
Next, you will need a pair of pliers or a crescent wrench to remove the dust cap that covers the bottom bracket spindle. This will give you access to the bolt that holds the spindle in place. You may also need a flat-head screwdriver to pry off the dust cap if it is stuck. Finally, you will need a socket set or a wrench to remove the bolt and washer that secure the spindle to the bottom bracket. With these tools at hand, you are ready to remove the mountain bike crank without a puller.
Read Also: How to Adjust Rear Air Suspension on a Mountain Bike: A Step-by-Step Guide
Step-by-Step Procedure to Remove Mountain Bike Crank Without Puller
Removing the mountain bike crank without using a puller can seem daunting, but by following a few simple steps, you can take it off with ease. To start, you will need a few tools – a rubber mallet, a 6mm and 8mm Allen wrench, a screwdriver, and a cloth. The procedure may vary slightly depending on the type of crank and bottom bracket.
First, loosen the crank bolts using the Allen wrenches. Next, take the rubber mallet and gently tap the side of the crank arm to loosen it from the spindle. If the crank doesn’t come off, try tapping it from a different angle or using a little more force. Once the crank arm is off, you can clean it and the bottom bracket spindle. Be careful not to damage the bottom bracket.
The next step is to remove the chainrings from the crank arms. Using the Allen wrench and screwdriver, remove the bolts from the chainrings. Then take the chainring off and give them a thorough clean. Reattaching the crank arm involves reversing the process above. So, slide the crank arm back onto the spindle, apply a little grease, and tighten the bolts back into place. Finally, reattach the chainrings and tighten the bolts using the Allen wrench and screwdriver. Congratulations, you have successfully removed your mountain bike crank without a puller.
Alternative Methods to Remove Mountain Bike Crank Without Puller
If you don’t have a crank puller but need to remove your mountain bike crank, there are a few alternative methods you can try. The first method involves using a rubber mallet or hammer to gently tap the crank on the non-drive side. This may loosen the crank from the bike’s spindle, allowing you to pull it off by hand or with a makeshift tool like a wire hanger or pliers.
Another option is to use a long bolt or threaded rod that fits into the crank’s spindle hole. Insert the bolt into the hole and then use a combination of leverage and rotation to loosen the crank from the spindle. This method can require some trial and error to get right but can be effective if you don’t have a puller on hand. However, it’s important to be careful not to damage the bike’s spindle or threads with this method.
You may also like: Understanding the Importance of Light for Your Mountain Bike: A Comprehensive Guide
Safety Precautions While Removing Mountain Bike Crank Without Puller
Safety should always be the top priority when removing a mountain bike crank without a puller. Accidents can happen, and it is crucial to take necessary precautions to prevent any injuries or damage to your bike. Firstly, turn off your bike and remove the chain from the front chainring. This will prevent the chain from getting caught in the process and causing any damage.
Secondly, wear protective gear, including gloves and safety glasses. This will protect your hands and eyes from any sharp edges or flying debris. It is also important to work in a well-lit area and to keep your work area clean and free of clutter. This will help you spot any potential hazards and prevent any accidents. By taking these simple safety precautions, you can ensure a successful mountain bike crank removal without a puller.
Common Challenges Faced While Removing Mountain Bike Crank Without Puller
While removing a mountain bike crank without a puller, there are a few common challenges you may face. One of the most significant challenges is getting a hold of the crank. You have to ensure that the crank is secure, and you don’t touch any other parts of the bike while removing it. If you fail to do this, you might end up damaging the other parts of the bike, which may lead to additional repair costs.
The second challenge is to ensure that you use the right tools. If you don’t have the correct tools, it might become very difficult to remove the crank. It’s crucial that you use the right tools, such as a rubber mallet, bike spanners, or an adjustable wrench, to remove the crank without damaging it or other parts of the bike. With a little bit of patience and the correct tools, you can easily tackle these obstacles and successfully remove the mountain bike crank without a puller.
Tips and Tricks to Make Mountain Bike Crank Removal Easier
When it comes to removing the mountain bike crank without a puller, there are several tips and tricks that can make the process easier. Firstly, you should ensure that the bike is secure before proceeding with the removal process. You can ensure this by using a bike stand or by flipping the bike upside down and resting it on its handlebars and seat.
Secondly, you can use a rubber mallet to gently tap the crank arm to loosen it from the spindle. Avoid using excessive force while tapping, as this can damage the spindle threads. Additionally, applying some lubricant to the spindle can also aid in loosening the crank arm. Another helpful tip is to use a plastic wedge to gently pry the crank arm from the spindle. Doing this helps to break any seal that might have formed between the two parts.
In conclusion, following these tips and tricks can make removing the mountain bike crank without a puller a much easier process. Remember to take your time and avoid using excessive force to avoid damaging your bike.
Related Post: Best Mountain Bike Under $3000: Top Picks for High-Performance and Value
Replacing the Mountain Bike Crank after Removal Without a Puller
After you have successfully removed the mountain bike crank without a puller, it’s time to replace it. The process may seem daunting, but with a few simple steps, you can easily install the crank back onto your bike.
Firstly, ensure that the bottom bracket is clean and free of any debris. Next, insert the spindle into the bottom bracket and align the crank arms with the spindle. It’s important to ensure that the crank arms are properly seated onto the spindle before proceeding. Finally, tighten the bolts connecting the crank arms to the spindle, ensuring that they are securely fastened. Congratulations, you have successfully replaced your mountain bike crank without the need for a puller tool!
Final Thoughts
Removing a mountain bike crank without a puller may seem intimidating at first, but with the right tools and techniques, it can be a manageable task. Whether you have a square-tapered or external bottom bracket, there are various ways to remove the crank arms without damaging the bike or struggling to make the puller fit.
One important thing to keep in mind is to use caution and follow instructions carefully. Rushing or forcing the crank off can lead to costly repairs or injuries. By investing in the right tools and taking the time to learn the proper method, you can save yourself the frustration and expense of a broken or stuck crank. With these tips in mind, removing a mountain bike crank without a puller should be an easy and rewarding task for any avid cyclist.