Maintaining your mountain bike is crucial to ensuring a smooth and safe ride. One of the most common maintenance tasks is removing the pedal crank for cleaning, replacement, or upgrade. However, for many bike owners, this task can be intimidating and challenging.
Fortunately, removing the pedal crank from your mountain bike is not as difficult as it may seem, especially if you have the right tools and follow the correct steps. In this step-by-step guide, we will walk you through the process of removing the pedal crank from your mountain bike, making it easier for you to maintain your bike and take on more challenging trails confidently.
Tools You Need for Removing a Pedal Crank from Your Mountain Bike
To remove the pedal crank from your mountain bike, you will require some essential tools. The most important tool in this process is a pedal wrench that is specially designed to remove and install pedals. You may also need a 5mm or 8mm Allen key, depending upon the type of crank bolt you have. A rubber mallet or a soft-faced hammer is also needed to loosen and remove the crank from the bottom bracket.
Apart from the above tools, you may also require a pair of pliers or a crank puller tool to remove the crank arm from the spindle. It is important to ensure that you have all the necessary tools before starting the process to avoid any unnecessary delays. By having all the tools, you will be able to remove the pedal crank safely and efficiently without damaging any part of your mountain bike.
Read Also: Can I Use a Mountain Bike for a Triathlon? Exploring Your Options for Race Day
How to Prepare Your Bike for Removing the Pedal Crank
To begin the process of removing the pedal crank from your mountain bike, you need to take some preparatory steps. Firstly, you need to ensure that the bike is properly supported. So, find a secure stand or support, which can hold your bike in place while you work on it. This is essential for your own safety and makes removing the pedal crank easier.
The next step is to have all the necessary tools at hand. You will need a hex wrench and a crank puller tool, which are used to extract the crank arms from the bottom bracket. Before starting, remember to check if you have the correct size of tools, as they vary depending on the type and design of your bike. Finally, clean the area around the crank and the bottom bracket using a spray or wiping it with a clean cloth. Doing this will remove dirt and debris that could interfere with the removal process. Following these simple steps will ensure that you remove your pedal crank with ease and without any damages.
Step-by-Step Guide to Removing the Pedal Crank from Your Mountain Bike
Removing the pedal crank from your mountain bike can be a bit of a challenge, but with the right tools and know-how, it’s a task that can be accomplished in no time. Here’s a step-by-step guide to help you remove the pedal crank from your mountain bike.
Firstly, start by removing the pedals from the bike using a pedal wrench. Next, use a 5mm Allen wrench to remove the crank bolt located on the non-drive side of the bike. Once the bolt is removed, slide the crank arm off the spindle and set it aside. Repeat this process on the other side of the bike to remove the second crank arm. Once both crank arms have been removed, the bottom bracket can be accessed for servicing. Keep these steps in mind to easily remove the pedal crank from your mountain bike.
You may also like: Top 10 Best Mountain Bikes Under $750 in 2023
Common Mistakes to Avoid when Removing the Pedal Crank
When it comes to removing the pedal crank from your mountain bike, there are a number of common mistakes that you should be aware of and avoid. One of the most common mistakes is using the wrong tools for the job. Attempting to remove the pedals or crank arm without the proper tools can cause damage to both the bike and the components themselves.
Another mistake to avoid is misidentifying the threads on the pedals. Remember that the threads on the pedals are different on the left and right side of the bike, so it’s essential to double-check before you attempt to remove them. If you fail to do so, you risk damaging the pedals themselves or getting them stuck in the wrong position, making them near-impossible to remove. Additionally, it’s essential to avoid using excessive force during the process, which can damage the bike or cause injury. Keeping these precautions in mind can make the process of removing the pedal crank from your mountain bike simple and straightforward.
Tips for Successfully Removing a Stubborn Pedal Crank
Removing a stubborn pedal crank can be a challenging task, but it is not impossible. There are a few tips and tricks you can use to successfully remove the pedal crank from your mountain bike. First, try using a penetrating oil such as WD-40 or PB Blaster to loosen the crank. Apply the oil generously and allow it to sit for a few hours before attempting to remove the crank.
If the oil doesn’t work, another method is to use a blowtorch or heat gun to warm the crank. The heat will cause the metal to expand, making it easier to remove. However, be careful not to overheat the crank, as it can cause damage to your bike. Additionally, using a crank puller tool can help remove the crank by providing leverage and easy turning. By following these tips, you can successfully remove even the most stubborn crank from your mountain bike.
How to Clean and Maintain Your Pedal Crank After Removal
After removing your pedal crank from the mountain bike, it is important to clean and maintain it properly. You should start by cleaning off all the grease and dirt using a degreaser or soap and water. This step is essential as it allows you to inspect the pedal crank for any signs of wear and tear, and to ensure that it is free from any debris that could cause damage.
Once you have cleaned the pedal crank, it is time to lubricate it. Apply a thin layer of grease or oil on the pedal threads and crank arms to prevent corrosion and rust. It is also recommended to use a torque wrench to tighten the pedals to the proper torque specification. Lastly, inspect the pedal bearings for any signs of wear and tear. If needed, replace them, ensuring that your pedals spin smoothly and silently when in use. With these maintenance steps, your pedal crank will perform optimally and last for many miles of riding.
Related Post: Best Entry Hardtail Mountain Bikes: Top Picks for Trail Rides
Reinstalling Your Pedal Crank: A Step-by-Step Guide
Reinstalling the pedal crank on your mountain bike is just as important as removing it properly. The first step in reinstalling the pedal crank is to make sure both arms are clean and free of debris. Next, lubricate the spindle with a light coating of grease or oil to prevent corrosion and rust. Then, slide the crank arm onto the spindle, ensuring that the splines are aligned properly.
Next, tighten the bolt or cap that secures the crank arm to the spindle using a torque wrench to the manufacturer’s recommended specifications. Repeat this process for the other pedal, making sure that both are tightened to the same torque specifications. Once complete, check that both pedals spin freely without any wobbling or play to ensure a safe and secure ride. By following these simple steps, you can safely and easily reinstall your pedal crank and get back to tackling the trails on your mountain bike.
Conclusion
In conclusion, removing pedal cranks from your mountain bike is a quick and easy task that can be done using basic tools. First, it’s important to ensure that you have the correct tools in hand, including a crank puller, a wrench, and a rubber mallet. Once you have these tools ready, follow the steps outlined in this article to remove the pedal crank with ease.
Remember to take caution when removing the pedal cranks as they can be tightly secured to the bike. However, with patience and the right tools, you can easily get the job done. Removing and changing pedals is an important part of bike maintenance that every rider should know how to do. So, take the time to learn this skill and keep your bike in top condition for all your adventurous rides.