Skateboarding is not only a thrilling sport but also an art form. Skateboard enthusiasts are known to have a strong emotional attachment to their boards – sometimes even treating them as pieces of art. It’s no surprise that individuals would want to display them for all to see. As skateboard culture continues to grow, so does the demand for creative ways to showcase these beloved boards. One popular method is to mount the skateboard on a wall.
Mounting a skateboard on a wall is not only a great way to show off your board, but it’s also a practical solution for storing your board, especially if you’re short on space. If you’re a skateboard enthusiast looking to learn how to mount a skateboard on a wall, then this step-by-step guide is for you. It will take you through all the necessary steps to achieve a professional-looking display.
Gathering the Necessary Materials and Tools
When it comes to mounting a skateboard on a wall, the first step is gathering all the necessary materials and tools. This will make the process smooth and efficient. For starters, you will need a skateboard deck, a set of trucks, bolts, washers, wall mounts, a drill, screwdriver, level, and a pencil.
When purchasing wall mounts, make sure they are compatible with your skateboard and can hold its weight. It’s also important to consider the type of wall you are mounting the board on as this will determine the type of screws or anchors you need. Once you have all the materials and tools, you are ready to move onto the next step of mounting your skateboard on a wall.
Read Also: Best Vans Skateboarding Shoes: Enhance Your Style and Performance!
Measuring and Marking the Wall for Optimal Board Placement
Measuring and marking the wall for optimal board placement is an important step when it comes to mounting a skateboard on a wall. Without taking accurate measurements, your board may end up lopsided or too high or low on the wall. Before you begin, you will need to gather a few tools, including a measuring tape, a pencil, and a level.
When measuring and marking the wall, it is important to find the center point for your board. This will ensure that your board is symmetrically placed on the wall. Measure the length of your skateboard and divide that number in half to find the center point. Use your measuring tape to mark the center point with a pencil on the wall. Then, use a level to make sure that the line you drew is straight. This will ensure that your board is displayed perfectly on the wall.
Preparing the Skateboard Deck for Mounting
Once you have chosen the perfect spot on your wall for displaying your skateboard, the next step is to prepare the deck for mounting. This can be a crucial step as it will ensure that your board hangs securely, and doesn’t fall or become damaged.
Firstly, it is important to clean the surface of your skateboard’s deck. Use a cloth to wipe away any dirt, dust, or debris. Take care while doing so as you don’t want to damage the graphics on the board. Once it’s clean, use a sandpaper to roughen the area of the skateboard deck where the mount will be attached. This will help the adhesive to stick better to the surface, making it more secure when hung up on the wall. Once the surface is ready, you can then proceed to attach the mount to your skateboard.
You may also like: Maximizing Convenience: How to Effectively Put a Skateboard on Your Backpack
Attaching the Brackets to the Wall
To properly mount your skateboard on a wall, you will need to attach brackets to the wall. These brackets will hold your board securely in place and allow you to display it like a pro. There are two types of brackets that you can use to mount your skateboard on a wall – the L-shaped brackets and the u-shaped brackets.
To begin attaching the brackets to the wall, you will need to measure the distance between the trucks of your skateboard. Once you have the measurements, you can mark where the brackets should be placed on the wall. While marking the wall, make sure that the brackets are level and aligned perfectly with each other.
After marking the wall, it’s time to drill holes into the wall where the brackets will be attached. Once the holes are drilled, insert anchors into the holes to reinforce the wall. Afterward, attach the brackets using screws and make sure they are secure. With the brackets properly attached to the wall, you can now proceed to hang your skateboard.
Installing the Board onto the Brackets
Installing the Board onto the Brackets
Now that you have the brackets properly installed, it’s time to mount your skateboard on the wall. First, make sure the brackets are level with each other, then place your board on top of them, making sure the trucks are lined up with the brackets.
When you’re satisfied with the placement, use a drill to screw the mounting hardware through the pre-drilled holes in the brackets and into the board. Make sure the screws are tight, but not so tight that they strip the holes. Once you’re sure the board is securely mounted, step back and admire your handiwork. You’ve now got a professional-looking display for your skateboard that’s sure to impress.
Adjusting the Angle of the Board for Optimal Display
Once you’ve decided on the height and location of your skateboard display, the next step is to adjust the angle of the board for optimal display. This is an essential step in ensuring that your skateboard looks its best and is easy to see from different angles.
Begin by placing your skateboard on its side, holding it firmly against the wall with one hand. With the other hand, gently push or pull the deck until you find the angle that works best for you. Make sure that the board is level and not sloping in any one direction. You can adjust the angle as many times as you need until you find the perfect position. Once you’re happy with the angle, use your drill and screws to secure the deck to the wall at the base and top trucks. Take a step back and admire your work – your skateboard is now mounted perfectly on the wall, ready to be displayed like a pro!
Related Post: Best Surfing Skateboards for an Unforgettable Ride
Troubleshooting Common Mounting Issues
Despite following all the steps carefully, mounting a skateboard on the wall may not always go according to plan. However, there are some common mounting issues that you can troubleshoot to ensure your board remains securely displayed, without damaging your wall.
One common issue is that the screws used to mount the board may become loose over time, causing the board to eventually fall off. To prevent this, tighten the screws periodically using a screwdriver. Another issue is that the board may not hang straight due to an uneven wall surface. In this case, try using wall anchors to ensure that the screws have a solid grip on the wall, which will help keep the board level. With a little problem-solving, your skateboard can be displayed on the wall like a pro.
The Bottom Line
As a skateboard enthusiast, learning how to mount your board on a wall is not only an efficient storage solution but also a beautiful way of displaying your prized possession. By following these simple steps, you can easily mount your skateboard on a wall without any major difficulties.
From choosing the right hardware to placing the skateboard in the right position, each step is crucial in achieving the perfect wall mount. Always keep in mind that safety is a top priority, and ensure that you double-check the stability of your skateboard before finally displaying it on your wall. With the right tools, patience, and attention to details, you can effortlessly achieve a wall-mounted skateboard that is both practical and aesthetically pleasing, making it the perfect addition to your room or workspace.